Separate hydraulic wire rope cutter
Product description:
FGQ-32-52 hydraulic wire rope cutter, mainly by the power source (with electric and manual pumps are available), operating cylinder, slide and cutting blades of several major components, it has a reasonable structure, convenient operation, quick cut , effort, etc., in particular due to the split structure, thereby fundamentally avoid the previous careless operation caused by the rope thrown bombs wounding phenomenon. The cutting machine can not only cut off φ32-52 mm rope, but also cut φ20 mm below the specifications garden bar. The cutting machine is a national initiative, widely used in metallurgy, mining, petroleum, bridges and other engineering sectors.
Main Parameter:
Instructions:
1, A hydraulic pump and a high-pressure hose connection and tighten the bolt back to the oil.
2, Pull out the active tip, turn rails and wire rope to be cut into the slot (direct penetration), having a good activity tip.
3, Pushed the handle up and down the blade forward, you can achieve the cutting operation.
4, Forward movement is completed, unscrew the bolt back to the oil, the cutter return, ready for the next operation.
Model |
Rated Pressure (Mpa) |
Blade stroke (mm) |
Maximum cutting force (T) |
Dimensions (mm) |
FGQ-32 |
63 |
40 |
16 |
600×230×120 |
FGQ-52 |
63 |
58 |
50 |
600×350×350 |
FGQ-75 |
63 |
85 |
100 |
500×400×800 |